Got a system upgrade.

C

Caleb

Member
My Computer spec's are now:

Gigabyte EP35-DS3P Motherboard with Bios flashed to F3
2 Gigs ddr2-800 Ram
Intel E6850 3.00Ghz with Zalman 9500a Led
Galaxy 8800GT 512 MB DDR3 Non-Overclocked which requires two
PCI-Express Connectors
2x320GB Western Digital Sata 2 Hard drives
Soundblaster Audigy Value

Pretty Good huh?

I've been able to get crysis working on high detail which is good and i've been able to play neverwinter nights 2 on highest detail setting but I did'nt try using Anti-aliasing and I did'nt use anti-aliasing on crysis either and a lot of my widescreen games run pretty well. :D

I'm having a little trouble restarting windows xp through windows and I have been able to restart through windows XP after running Speedfan 4.34 but loading up windows and restarting through windows xp without running speedfan 4.34 I can't restart win xp without pushing the reset button.
 
What power supply are you using? That's a pretty hefty system you have there. Needing to run speedfan tells me that power may be an issue since speedfan will throttle power usage down much more aggressively than windows or the bios does by itself.
 
I'm using a Antec NeoHe 550Watt Power supply.

The Amperage is:

+3.3v: 24A
+5v: 20A
The three +12v rails each is 18A
-12v: 0.8A
+5Vsb: 2.5A
 
You might be correct, I think i have been able to restart through
Win XP without Speedfan before I installed the Soundblaster Audigy Value drivers and Audigy software and after that I think the Non-restart problem started.
 
When I setup systems with audigy 2/4s I used a community driver that was packed full of features (full routing w/ various effects). I forgot the exact name but it was sooooo much better then creatives junk they throw out.
 
You must log in or register to reply here.
Back
Top